ColocatedServerConfiguration

From IntuixWiki

(Difference between revisions)
Revision as of 10:02, 10 June 2009
Sia (Talk | contribs)

← Previous diff
Revision as of 10:03, 10 June 2009
Sia (Talk | contribs)

Next diff →
Line 21: Line 21:
* Flow control: none * Flow control: none
* Connection type: direct connection * Connection type: direct connection
- * Continue redirection after boot: yet (sometimes also called Agent after boot)+ * Continue redirection after boot: yet (sometimes also called "Run Agent after boot")
We can accommodate different speeds for serial console; above are default settings. We can accommodate different speeds for serial console; above are default settings.

Revision as of 10:03, 10 June 2009

Contents

Colocated Server Configuration

General

- label computer with your system "handle" (as assigned by Intuix LLC) on front and on the back; optionally add label with your company name and contact information

- label network ports especially if manufacturer labeling is wrong

- if you have multiple drives - please label each drive with your system handle and drive #, i.e. "handleA disk#1"

BIOS Configuration

* enable USB support and Legacy USB support, so we can use USB keyboards
* ignore POST errors (especially keyboard, floppy, etc)
* set "Power loss" mode to "Stay on"
* enable BIOS console redirection if available: 
   * COM1 (COM A)
   * Speed: 9600 baud
   * Console type: VT100, 8bit
   * Flow control: none
   * Connection type: direct connection
   * Continue redirection after boot: yet (sometimes also called "Run Agent after boot")

We can accommodate different speeds for serial console; above are default settings.

OS configuration

* turn on OS serial console on serial port 1, with settings as above

Configuring serial console:

Linux: http://www.vanemery.com/Linux/Serial/serial-console.html

FreeBSD: http://www.freebsd.org/doc/en/books/handbook/serialconsole-setup.html